Header Overview

Mounting your own propellers

The propellers can be slid over the axles and be fastened using a plastic nut. Do not fasten the nut too tight, as this would bend the propellers.

Please note that there are two types of propellers: One pair of propellers is spinning clockwise, the other pair is spinning counterclockwise. The propellers spinning clockwise must be mounted to the front and the rear motor, whereas the counterclockwise rotating propellers must be mounted to the left and to the right motor.

To improve the durability of the propellers during a crash you can optionally add a cable tie (e.g. 2.5 x 100 mm) as seen in the following picture.